Wireless Mobiledata

Northern California:

650.726.7791

Southern California:

562.421.1681

Use your back key to return to the previous page.....

Email: sales@wirelessmobiledata.com

COMPANY BROCHURE

CONTACT

SPEC SHEETS

RETURN HOME

ABOUT

Simrex Integrated Networks

Vehicle Router with 7 LAN Ports + WIFI


The DatamoverMR is a rugged industrial grade 7-Port router plus High Power 802.11bg Access Point. When coupled with an external EVDO Rev A, HSUPA Airlink RavenX or Pinpoint X modem, the Router will pass data traffic from the Cellular Network to the WIFI Router thus allowing WIFI Enabled Laptops to communicate via the Cellular Network.The DatamoverMR can also be utilized on standalone WIFI or Mesh Networks as the Vehicle Router. The Mobile Router supports OBD-II and AVL/GPS systems if third party software is deployed.The DatamoverMR is ideal for transit, police, fire and ambulance services where a robust mobile network is to be deployed requiring high vibration & shock, high heat performance and dust protection. The platform can be readily reconfigured for custom networks. As an example, the DatamoverMR can be deployed as a fixed point EVDO-WIFI Bridge for 'last-mile' communications.A Dual Radio option is also available supporting both an Access Point and Client Radio in a single enclosure.


Vehicular Router
Up to +36dBm RF Output with appropriate antenna
-94dBm Rx Sensitivity at slowest speed
Vehicular Access Point 802.11bg (802.11A option)
Multi Radio Options: 802.11abg, 4.9GHz, Client & Access Point
Supports up to 7 LAN connections
Industrial Packaging and Environmentals
 
Simultaneous Wireless AP + Bridge for repeater functionality
Vibration, Heat, Dust and Shock Tested
IP MAC Filtering & Tunneling plus WEP security
Remote Configuration Management
Compatible with external 3G data modems
Tested with Airlink EVDO REV A PinpointX & RavenX
-20C to + 70C operating, -40C to +80C storage
 

WI-FI Panels, and Speciality Products


The Datamover802.11BG provides a weather tight outdoor rated WI-Fi panel that can be used as an Access Point or as a Wireless Bridge. The unit is powered via POE simplifying the installation. This is an ideal panel where coverage is required to spray signal as example into a building or enclosed area. The 802.11BG has been configured in many EVDO to WIFI bridging networks. An example using this package to provide EVDO to WIFI coverage for a 82ft x 25 ft yacht can be seen by clicking the link HERE. Contact us for additional applications


Wi-Fi Panel
CEP/Bridge with AP/Repeater Capability
Power over Ethernet
IP65 Outdoor Rated
Compact Size 6.4"L x 5.4"W x 2.1"D
-20C to +70C Operating Range
   
 
Wireless G (OFDM)
Remote Backwards Compatible
Remote Configuration Management
High Transmit Power w/9dBi or 16dBi internal antenna
Up to 54MBps Data Rates